TEAC MD-H500i
| Name | MD-H500i |
|---|---|
| Manufacturer | TEAC |
| Released | 1999/01 |
| Device type | deck |
| Recorder | Recorder |
| MDLP | No |
| NetMD | No |
| Hi-MD | No |
| Radio | No |
| Dimensions | Width 285 x H 103 x D 340 mm |
| Weight | 3.7kg |
| ATRAC ver | |
| Battery | |
| Sidecar battery | |
| Voltage | 100, 120, 230 |
| Power cable | AC |
| Price (launch) | |
| ¥75 000 |
|
| - | |
| Inputs | RCA in, Digital optical (TOSLINK) |
| Outputs | RCA out, Digital optical (TOSLINK) |
| Control |
MD-H500i
It is equipped with editing functions such as DIVIDE that can divide songs, ERASE that erases unnecessary parts, MOVE that rearranges the order, and COMBINE that connects songs.
The sound-synchronth recording function is carried and the sound-recording can be started automatically according to the play start of a connected CD player, a cassette deck, etc. Also, when the playback ends, the recording will be paused.
The FL display is carried.
Solid aluminum is used for the front panel. Moreover, the thing made from the steel board with increased rigidity is adopted as a main chassis.
In addition, system control is possible by connecting to the remote control terminal of the Diac component “Ernest Series”.
Remote control RC-627 (this is not specified in the manual but it does work with the RC-725)
- Frequency Response: 20Hz-20kHz +/-1dB
- Sampling Frequency: 44.1kHz
- Signal-to-noise ratio (playback mode): More than 92 dB
- Dynamic Range (playback mode): More than 90 dB
- Analogue input sensitivity/ input impedance: 500 mV / 22 kOhms or more
- Analogue output level/ output impedance: 2.0 V / Less than 300 Ohms
- Digital input: Optical (wave length 666 nm) -15dBm ~-21dBm
- Power Consumption: 14w
Content adapted from: audio-heritage.jp
Manuals
Repair
Photos
Submit your own! Edit the page, use the photo submission form, or Contact us.